Honda CX 500 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,366 Posts
1. If the TAIL lights work then the ground to the tail/brake light is OK, if not then find the bad ground.

Also check for 12v with ignition on at the rear brake switch feed (black wire under the seat). And check that bith filaments in the tail/brake lamps are working.

2. Front bulbs have two filaments. When the turn signal is on the park filament is turned off on that side and the turn filament lit. Do you have both feeds to the bulbs connected? I believe the left is orange and the right is light blue, but that is from memory, so check the wiring diagram.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top