Honda CX 500 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
169 Posts
Discussion Starter · #1 ·
I was reading through the forum to see if anyone had any good ideas about how to get the 30 year old stickers off parts. Luckily someone said to use a blowdryer - Oh my Gosh, it worked PERFECTLY! It was very hot on the hands, but with the blowdryer on high/Hot and a good razor blade scraper, I had all of it off in about 20 min. Keep the blowdryer heating the sticker in front of the scraper, and it just peels right up! Now I am going to use Goof Off to get the glue residue off and then get it ready for paint.



Thanks to all the Help from the Forum!!!!!!!!!!
 

·
Registered
Joined
·
503 Posts
Glad to hear that someone had success. Do you think that the decls could have been used over? I am going to try removing them from an old tank to see what kind of success is possible. Don't even know if they are under the clear coat.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top