Honda CX 500 Forum banner
1 - 1 of 5 Posts

· Registered
31 Posts
Discussion Starter · #1 ·
I managed to strip one of the M10x75x1.25mm bolts and inner threads on the front engine hanger after removing and relacing my crash bars. It bolts up to the egine case and holds the radiator cowling in place. Any suggestions on the simplest way to fix this. I don`t currently have any taps or dies. I have ordered a new bolt from Honda but the inner threads will need to be fixed somehow. Any helpful tips would be appreciated. Thanks.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.