Honda CX 500 Forum banner

still noisy

4346 Views 48 Replies 14 Participants Last post by  Shep
So it took me a long time to do, between all the other projects I had going, but I finally finished putting the bike back together after replacing the cam chain. There was some pretty bad wear inside the case from that thing.



Unfortunately, the bike is still noisy. It's pretty decent when the motor is cold, but once it's warmed up, it's still pretty noisy (albeit not as bad as before I did the chain).



I've properly tensioned the chain, and have checked/adjusted the valves (.003 and .004 with the motor stone cold). What else can I do?
1 - 1 of 49 Posts
If it's not as loud once the bike is warmed up as you've stated then it's probably clutch rattle...very, very common. Not a necessity to fix if that's what it is, just irritating.
1 - 1 of 49 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top