Honda CX 500 Forum banner
1 - 2 of 5 Posts

· Registered
66 Posts
Discussion Starter · #1 ·
I’m in the process of switching my stator. I have a grounding question. I’m installing a TI stator in my 81 CX500C. I removed the advanced pulser coils from the engine cover. I’m going to ground the stator in one of these screw holes. Do I need to have an additional ground wire come from here and ground to the frame of the bike or the battery? I also have an Ignintech installed.

Thanks in advance,

1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.