Honda CX 500 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3,999 Posts
Found the starter problem I think there was an extra thrust washer on the reduction gear for a total of 3.Now the question is where did the extra come from?


This is a link to the parts fiche for the alternator,,it show the 2 washers on the starter gear shaft. I don't see any other washers there.



http://images.cmsnl.com/img/partslists/alternator-cx500c-custom-1979-usa_bighu0112e5015_3d92.gif



This link is to the shift mechanism fiche,,it shows 1 washer on the gear shift shaft, #20.



http://images.cmsnl.com/img/partsli...x500c-custom-1979-usa_bighu0112e5021_bcb3.gif



I do not know where else your extra washer would have come from.
 

·
Registered
Joined
·
3,999 Posts
Don't forget to be sure you can shift the transmission through all the gears before you install the engine,,it's a bummer to get it all back together and discover you can't shift gears. B.T.D.T.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top