Honda CX 500 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
8,422 Posts
I had this early on in my CX ownership.It was a frayed wire at the starter button needed re-soldering.





Be very careful when servicing the Throttle assembly.There's a very very tiny ball bearing on the UK models in the light switch mechanism.Lose this and the switch will be vague and not engage properly.The UK models have a 3 position switch e.g off,park and Main.I'm not sure of the arrangement on the US models and GLs.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top