Honda CX 500 Forum banner
1 - 2 of 12 Posts

· Registered
8,355 Posts

I checked the A and B cables with engine off and they work fine, they move and return the round part they connect with very well. I can not find a binding problem. That is why I was looking for air leak (boots). I am not having luck there either. with air leak I should have a start problem which I don't.

Loose 10mm lock nut on the A Pull cable at the carb?

As for boot leak,

Also had a thought.I suppose it could be a stuck Advance and retard
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.