Honda CX 500 Forum banner
1 - 1 of 17 Posts

· Registered
3,425 Posts
Be sure to take you tank off for all these steps. No sense messing up the paint.

One more off the wall thing that I saw work. Take the caliper off with the bleeder closed, but loose. Put a block of plywood in the caliper and raise it higher than the master cylinder and try bleeding it in the air. Any air in the line should rise to the top. Weird, but I saw it work one time.

At the same time several people on the forum have had problems with bad new MCs bought on-line. Let us all know how you solve it when you do.
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.