Honda CX 500 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3,771 Posts
What a lot of people have done is change the the socket or whole turn signal to the type that uses the 1157 bulb and then use the red LED replacement bulbs for the 1157s. The yellow lenses will be red with red bulbs.



If you look hard you can even find LEDs that have red running light with white turn signal bulb lights.



That way you have the law required red running lights with yellow turn signals.



Of course that means you need the LED flasher can which is in fact a timing device to flash the lights.



You can/should replace your front signal lights with LEDs if you do this conversion.



Make sure that you get bright LEDs as there are dim ones out there that can hardly be seen.
 

·
Registered
Joined
·
3,771 Posts
I recommend www.superbrightleds.com



They make totally bright stuff. I'm about to order the daytime running H4 bulbs for my added spot beams


Three H4s will just about max out your electric output ... Maybe you want to get some LED or HID driving lights instead.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top