Honda CX 500 Forum banner

Pod Air Filters to fit GL500

1425 Views 25 Replies 10 Participants Last post by  LaGrasta
Hi All, I'm new to the forum. I am building a street tracker using a 1982 GL500 .
I am struggling with fitting pod air filters as the gap between the carbs and the frame is fairly small . I have thought about trying to mould standard pod filters around the frame. Its a posh was of saying I was going to bend them out of shape to fit...!!! Has anyone used shallower filters or is there another workround to fix this problem.?

Many thanks in advance..
1 - 2 of 26 Posts
1 - 2 of 26 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.