Honda CX 500 Forum banner

please help- can anyone identify these wires and maybe guide me

1087 Views 8 Replies 7 Participants Last post by  Sidecar Bob
I recently have purchased a cx500 shitter. Although it looks horrible, The motor should run once I get everything squared away. upon buying the bike, I said fuc it I'm gonna figure out a different way to wire the bike. Then realizing oem wiring would be the easiest way... or at least I think so. Thing is in horrible condition, throttle, choke, brake lines all corroded out. fuel lines as well and the coolant bottles cracked. master cylinders locked up. I pretty much stripped this bike to its bare ass and now I'm fiending to give this thing a rip. I've thrown the carbs in the ultrasonic cleaner and cleaned it very well although the outside of them still look like shit. except the butterfly on one side gets stuck. And I'm almost certain it will leak fuel somewhere. Idk just throw me in a general direction so I don't have to look at this shitta like this for that long. here are the photos and i hope this forum will get somebody to reach out.
Hand Motor vehicle Automotive tire Hood Automotive design
Automotive tire Motor vehicle Finger Automotive design Automotive exterior

Automotive tire Tire Motor vehicle Bumper Bicycle part

Tire Wheel Fuel tank Vehicle Automotive fuel system
Motor vehicle Fixture Gas Auto part Metal

Bicycle part Gas Motor vehicle Machine Cylinder

Automotive tire Motor vehicle Gesture Automotive wheel system Automotive exterior
See less See more
1 - 1 of 9 Posts
This may help.
Azure Font Aqua Material property Parallel
See less See more
  • Like
Reactions: 1
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.