Honda CX 500 Forum banner
1 - 4 of 4 Posts

·
Super Moderator
Joined
·
15,417 Posts
Yeah, I know, I'm nuts.



It's easier to fill them on the bike for that style. But what I do when I want it all done is I have a whole triple tree and I put the forks in them sliding the tree down to the lower and bolting them down. Then they won't move when I put pressure on them.
 

·
Super Moderator
Joined
·
15,417 Posts
Cross threading isn't a problem with these caps.



A trick is to put the cap on with the short spring out and turn it till it catches the threads. At that point mark the fork and cap with a sharpie on masking tape. Then it's a simple job with them on the bike.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top