Honda CX 500 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
Hey guys, turns out the previous owner broke the bleeder off of the left caliper of my 82 Gl500i. After messing with it for a while I decided the remaining part is pretty stuck so I'm looking to buy another one. If anybody has one let me know, Thanks - Zac
 

·
Registered
Joined
·
594 Posts
You might be better off taking it to a machinist and having him drill it out. These calipers are getting difficult to come by (although the brackets are even more scarce). I had the same issue, we drilled it out, ran a tap thru, and viola! Good as new.

Now if you happen to need a right side caliper, let me know, I have a load of them...

-tom
 
  • Like
Reactions: zmoneygl500

·
Registered
Joined
·
10 Posts
Discussion Starter #3
I think that is my next plan of action. I was going to do it myself but taking it to a machinist sounds like a much better idea. Thanks
 

·
Registered
Joined
·
12 Posts
i have a left side caliper from a 500i( mine was single caliper model for some reason). it will need rebuilding, but was working when taken off. lemme know if you want it :grin:
 
1 - 5 of 5 Posts
Top