Honda CX 500 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2,601 Posts
Better contact whoever sealed it and report the problem. You're also going to need to know wjhat they used to seal it as what's left in there is going to need to be cleaned out before you seal it again with POR15. If you don't it will be like putting fresh paint directly over badly peeling paint - it will come off in time.
 

·
Registered
Joined
·
2,601 Posts
MEK is usually a bit better than acetone and pretty much the same price. Another Home Depot item.

It will dissolve most stuff they could have used for coating.



Remember that toluene probably won't touch it as gasoline contains some amount of toluene by nature, matter of fact that may be why some people are losing their coatings. The Premium gas I buy or my car is sometimes obviously rather toluene heavy, at other times it's xylene heavy. both are rather high octane and many racers add one &/or the other to regular pump gas to up the octane.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top