You have to loosen everything, 4 bolts in the triples, fender, axle nut, then stradle the wheel and pull things straight, then tighten again, starting from the bottom up.
You might have a fork clamped in the triple at a cockeyed angle.
is my front wheel missing something!
So I finally noticed my un-aligned front wheel. I always noticed a slight angle on my bars but I assumed the tank wasn't on straight or something. Between the right fork and wheel is there supposed to be a collar or spacer? I just have the axle rod to a rubber bushing in the wheel.
I took everything off at work and I could swear something is missing to make the forks twist or something. Nothing has any marks of a bend and no welds have stress cracks or rust so what's up here. I'll post pics later.
I took everything off at work and I could swear something is missing to make the forks twist or something. Nothing has any marks of a bend and no welds have stress cracks or rust so what's up here. I'll post pics later.
1 - 1 of 20 Posts
You have to loosen everything, 4 bolts in the triples, fender, axle nut, then stradle the wheel and pull things straight, then tighten again, starting from the bottom up.
You might have a fork clamped in the triple at a cockeyed angle.
1 - 1 of 20 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda CX 500 Forum
A forum community dedicated to Honda CX 500 motorcycle owners and enthusiasts. Come join the discussion about modifications, parts, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Top Contributors this Month
View All
Sidecar Bob
221 Replies
Randall-in-Mpls
164 Replies
CXPHREAK
111 Replies
Recommended Communities
