[Spring Brook Rider]

I know this has been covered before but I don't seem to be able to find it. Where can a guy order those tiny little 90 degree fuel filters that fit so well in our fuel delivery line? Thanks again.

 

[rickbert]

More than likely any local auto parts store.....or lawnmower store/shop.

 

[Bryan]

Just enter "90 degree fuel filter" in your search bar. You'll find sources.

 

[morrow]

This is what I use...they aren't 90 degree but they take up less room that any i've found so far. You can find these in several places...I got mine at Lowes.



http://www.briggsandstratton.com/maint_repair/parts_supplies/details.aspx?pid=298090S



http://www.z1enterprises.com/detail.aspx?ID=295

 

[JWink]

I got mine at Auto Zone. Its not a 90 degree but it fits well. It is also clear so you can see the fuel flowing.

 

[kingston73]

Like Rickbert said, try a local hardware or lawn equipment shop, or Ace hardware or Advance Auto, pretty much any place should have something that works.  If you don't want to search I think JC Whitney sells a few different ones, but you'll probably want to buy a few or you'll pay more for shipping than you will the part.

 

[Blindstitch]

This is what I use...they aren't 90 degree but they take up less room that any i've found so far. You can find these in several places...I got mine at Lowes.



http://www.briggsandstratton.com/maint_repair/parts_supplies/details.aspx?pid=298090S



http://www.z1enterprises.com/detail.aspx?ID=295

You might not want to use those. Junk still gets through.

I use these.

http://store.knfilters.com/search/product.aspx?Prod=81-0221



They do make an angled one too.

 

[Spring Brook Rider]

I know this has been covered before but I don't seem to be able to find it. Where can a guy order those tiny little 90 degree fuel filters that fit so well in our fuel delivery line? Thanks again.

 

[Spring Brook Rider]

Thanks guys. I went through all the local Car Quest filter books and didn't find what I was looking for. Have tried the Briggs and a few others but they were bulky and didn't filter down to specs i wanted. Thanks Stitch for the KN link. One thing I did learn with the other ones that if you route the line over the left carb and then connect it you find yourself dead on the road after fifty miles or so. Put. Put. Put. RRRRRRR. Then get out the snippers and re connect it the original way and feel relieved whan you make it into your own driveway. Hah!

 

[Billrod]

Most auto stores in my area don't carry what you are looking for. If you google "Visu-Filter Large Capacity 90-Degree Fuel Filter" (without the quotes) I think you will find what you are looking for. BillRod

 

[Shep]

I use ones similar to Stitch,



http://cgi.ebay.com/ebaymotors/Gas-...6153421QQptZMotorcyclesQ5fPartsQ5fAccessories



Also fitted to a GL with no problems.



Note: 1/4" can be used same as 6mm but check hose size.Also can be flushed under the sink and then blown through with Carb/Brake cleaner.

 

[marshallf3]

You might not want to use those. Junk still gets through.

I use these.

http://store.knfilters.com/search/product.aspx?Prod=81-0221



They do make an angled one too.

Would love to figure out the p/n of the angled K&N but that website isn't very cooperative.

 

[Trickster]

+1 to what Don and Shep said, the filter stone type are superior and not much more money.

I too tried to find the K&N 90 degree one, but was told it was not available and steered away by the parts guy

on the swivel type cause they can/have leaked.



Rick

 

[Blindstitch]

Maybe here.



http://www.clarkemfg.com/cart/index.php?main_page=product_info&cPath=40&products_id=348



http://www.scooterpartscatalog.com/in-line-fuel-filter-129-18.html

 

[wmw]

Guys K&N P/N 81-0222 - unfortunately has been discontinued.



You can purchase 90 degree fuel filters 1/4 flange on ebay of course. Discussed on the old forum, but unfortunately the link from search results is currently 404'd (like most of them) and won't load.

 

[Cobram]

Home Depot has them in the small engine/garden equipment and parts section.

 

[kens97sto171]

You might not want to use those. Junk still gets through.

I use these.

http://store.knfilters.com/search/product.aspx?Prod=81-0221



They do make an angled one too.

I just bought one of these at O Reilly Auto Parts.. it was a coupl ebucks or so.

 

[WayneDW]

SBR, if you get into the city I know of two places near me that stocks them: Cycle Supply on 43rd and Nicollet. Also Twin City Honda on East Lake Street.

Closer to you, I'd think that MotoPrimo in Lakeville would have them too, but am not positive.