Honda CX 500 Forum banner
1 - 1 of 11 Posts

· Registered
4,630 Posts
No, that isn't supposed to happen. The pistons should be able to be raised and drop back when lifted through the choke butterfly hole. Are you installing the plastic ring first? Then drop the piston in, add the spring and then the cap. Maybe there is a burr on the piston top? Or one on the plastic ring? I think the purpose of the plastic ring is twofold, one to provide a cushion when the piston drops, and to provide a seal at the cap and carb body. must be a new member.can you please set up your your location and your bikes details......lmao

nice to see you back Blue
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.