Honda CX 500 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,282 Posts
Three things come to mind:



Cables installed too tight. There should be 1/8" slack at the handlebars before the mechanism moves on the carbs.



Carb bodies were separated and not properly aligned when reassembled.



Cable holding bracket on the carb has shifted. Back off the mounting screws and retighten.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top