Honda CX 500 Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
160 Posts
Discussion Starter · #1 ·
Hello to all i am currently rebuilding a cx400c basically i am turn the bike into a bobber..... i bought this bike 8 months ago from a guy who stop riding the bike 5 years ago.... i have done a triple by pass to the bike clean the carbs a dozen time last time i clean them with ultrasonic cleaner..

when i am trying to start the bike the bike is running on one cylinder (left) the right cylinder is just bike firing huge time.... the bike is a ti ignition.... i checked the ground ignitor according to dave f web site ti ignition troubleshooting guide....

i have spark to both cylinder

petrol is flowing ok

I have done a compression test leak down test with no indicates that the bike has a problem..


Please help me not give that to this bike is gonna end in a great bobber bike :)

I will post some pictures later

thank you for all your help
 

·
Registered
Joined
·
3,804 Posts
Did you do the bench synch procedure on the carbs before install?
This would have them close and then use a manometer to get them perfect.
 
1 - 4 of 4 Posts
Top