Honda CX 500 Forum banner

Handle bar switches

2K views 14 replies 6 participants last post by  sugar13free 
#1 ·
So i put drag bars on my bike which work pretty well for the most part... only problem i've run into is the clearance with the left plastic piece that has the blinker switch on it..



Does anyone have info on how to wire up a custom switch. The plastic one is just way too bulky and large. Suggestions and criticism welcome




thanks guys
 
See less See more
1
#2 ·
pics? I don't know what you are refering to...
 
#13 ·
You could always try what I'm doin - I'm not gonna run any switches on the bars. I've got clubman bars on my 500 with GSXR brake and clutch levers. In the process of making switches that will mount below the seat. Should have them done this weekend.
 
#15 ·
I don't want to steal this post so I'll make it quick. No turn signals (that's what arms are for), throttle sleeve is just a standard 7/8 I bought on ebay. Start button, kill switch, horn, and lights will be under seat - no other switches needed. i'll start a new post this weekend when its done.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top