Honda CX 500 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
174 Posts
K i'll be brief with this...you really need to buy or download the factory service manual...I think the free one is in Blindstitch's signature.



Tighten axle nut first

Tighten front clamp nut

press the fork over so the clamp is level with the end of the axle shaft

Tighten the rear clamp nut

PLEASE check the factory service manual BEFORE doing this for the correct torques and a nice little drawing of how to line-up the edge of the fork with the edge of the axle shaft!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top