Honda CX 500 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5,563 Posts
ill probably get stick but.a very sharp low grind wood chisel.all the way around,bit by bit.slowly slowly.that cover will not appreciate distorting.1/2 mm at a time.
 

·
Registered
Joined
·
5,563 Posts
In addition to the gasket, this is the perfect time to replace the seal for the clutch actuator rod.
and the pump pick up,there is a gauze,that needs to be clean.adjust the pump chain[if you can,there is not a lot of adjustment]
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top