Honda CX 500 Forum banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
11,467 Posts
Good point on the pin hole in the MC, as they are soooooo small and get clogged easily if the system hasn't been cleaned fully for some time. Just remember, that hole is a bugger to get to, and you will have to do a fluid bleed. I can't recall what is best to use, but seem to think it was a very small drill bit, like .008 or some such. Much smaller than a paperclip.



Joel in the Couve
 
1 - 1 of 1 Posts
Top