Honda CX 500 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
24,496 Posts
Just did the Murray carbs this weekend on my GL500. Above comments helped a lot with the tripe frame rail routing. I am running into one other issue on the throttle cable having too much slack that is resulting in throttle play. I adjusted the cable but just not enough adjustment to get the play out. May call Murray tomorrow to see about switching to a quarter turn also.
get a quick turn throttle tube it will take the slack out
or get a single pull throttle for a cb450 honda and file fit it
 
1 - 3 of 3 Posts
Top