[Randall-in-Mpls]

Bob,
I should have had you include the center stand. To satisfy my curiosity, what would it cost to ship that here?

Thanks,
Randall

 

[Sidecar Bob]

About $40 CAD but there would be room for some other stuff in the box with it...

 

[Randall-in-Mpls]

I can source one locally for less than that, I think. I might even be able to borrow one.
I have one that I can cut and modify, but it would be good to have another intact for reference.

Thanks.

 

[Sidecar Bob]

Yeah, that's a lot for a stand. Too bad you aren't close enough to drive over and fill your trunk....

 

[Randall-in-Mpls]

Too bad you aren't close enough to drive over and fill your trunk....

I do have a passport and some manditory PTO coming.
Nah, I don't think the wife (or the COVID-era border authorities) would go for that.

 

[Sidecar Bob]

I finally took the time to sort through most of it, remove the junk (like the crudely modified universal crashbar with peeling chrome), get a better idea what there is and take some better pics:
Prices are still the same (& I am willing to consider offers on multiple items) and again, please quote the picture number when contacting me.

Pic #A-1
2 '80s Honda tail lights (GL500. GL1100 & other models)
3 wiring boxes in various conditions (first one gets the cover)
GL500 indicator light assembly
GL500 speedometer (71,966 Km)
GL500 speedometer with bracket & lights (no cover)(56809 Km)

A-2
GL500 seats: 2 front, 2 rear

A-3
GL500 airbox, airbox/carb boot, 2pcs GL500 separator chamber (also fits CX500E, CX650E)
GL500 driver footpegs
Generic highway pegs
GL1100 ('82) master cylinder
GL500 master cylinder
GL500 driveshaft

A-4
Assorted logos/emblems. Some still have the attachment pins, a couple of the big ones have holes for mounting screws (the others could be drilled)
CX650 engine emblems gone)

A-5
GL500/650 coolant recovery tanks, various condition
GL500/650 air dams (may fit CX500 too)
GL500 rad grill

 

[Sidecar Bob]

A-6
GL500 radiators & fan shrouds

A-7
GL1100 shocks, various condition (all would need rebuild)

A-8
GL500I lowers - (note crack in right black)
(Silver lowers & winter lowers gone)

A-9
GL500 throttle pull cable
2 pcs GL500 clutch cable
GL500 choke cable
4 pcs speedometer cable (GL500, GL1100, other models)
GL1000/1100 tachometer cable

A-10
GL1100 right switch + twistgrip + both throttle cables
GL500 fusebox/handlebar clamp
GL500 right switch + twistgrip
GL500 left switch (note missing high/low switch knob)(gone)
GL1100 turn signal cancelling unit
GL1100 coil assembly
CX/GL500/650,GL500/650 TI coils (not for CDI)
GL500 electrical plate with TI spark units
turn signal flasher (2 terminal) with rubber mount

 

[Sidecar Bob]

A-11
Another set of GL500 switches + twistgrip
Parts from Markland rack (looks suspiciously like the one on 2005rs Jeff's GL650I with GL1100 trunk)(black parts gone)

A-12
GL500/650 saddlebags (nasty inside but solid)
Turn signal relocation brackets for use with bags (part of mounting system IIRC)
Footpeg guards/latches for the saddlebags' "seat belt buckles"

A-13
CX500 final drive (note bent dust guard)(this was my spare for Eccles but I decided to keep the GL500 one instead)

A-14
CX/GL500 rear brake assembly

 

[Sidecar Bob]

A-15
GL500 fairing brackets (2 pcs)
GL500 engine hangers

A-16
CX/GL500/650 rear signals (no lenses)
GL500/650 tank rubbers
Cassette player with cover (NOT tested)
3 horns(gone)
7V regulator
GL500 shift pedal
GL500/650 footpeg guards/latches for the saddlebags' "seat belt buckles" (another set)
GL500/650/1100 + other models brake line joiner (2 pcs)
Unknown bracket

A-17
GL500 crashbars (gone)
GL500/650 front fender trim
GL1100 front fender trim
GL500 chrome pieces from rear of frame

NOT PICTURED
GL500 rear fender inner & outer
GL500 wheels front & rear with ancient tires (pick up only)
GL500 frame with swingarm, triple clamps, Ontario ownership papers (pick up only)
GL500/650/1100 various fairing parts (I haven't sorted those yet so I'll take pics of them in a few days)
Various fairing parts

 

[nippongreen]

Bob,
I'll send you a PM (conversation) Re: the CX650 motor emblems in pic #3
Cheers....Keith.....

 

[Stan in Toronto]

Hi Bob, Its been a few years since I've been here and the site looks different. It's great to see you are still riding. In the time that has passed my large supply of CX and GL spares has dwindled down to almost non existent and I find myself in need of a starter for my GL650 if I hope to ride it into my 70's. (69 on my next birthday) Took the old starter apart and there is damage to internals. Although I didn't see a starter in your pictures, I'm hoping you may have one or have a lead on where I may get one. Thanks in advance...

Stan

 

[Fafnir]

Bob,
I am interested in the horns. My right horn on my GL650 isn't working.

Thanks!
Lee

 

[Sidecar Bob]

Hi Stan: Sorry, I don't have a starter that I want to part with at this time.

Lee: Send me a conversation (what we used to call a PM) with your zip code and I can let you know what the shipping would cost.

 

[Bri-Guy-GA]

Do you have left hand controls for a GL500 by chance? How and shipping to Villa Rica, GA?

 

[OldGold]

I finally took the time to sort through most of it, remove the junk (like the crudely modified universal crashbar with peeling chrome), get a better idea what there is and take some better pics:
Prices are still the same (& I am willing to consider offers on multiple items) and again, please quote the picture number when contacting me.

Pic #A-1
2 '80s Honda tail lights (GL500. GL1100 & other models)
3 wiring boxes in various conditions (first one gets the cover)
GL500 indicator light assembly
GL500 speedometer (71,966 Km)
GL500 speedometer with bracket & lights (no cover)(56809 Km)
View attachment 202736

A-2
GL500 seats: 2 front, 2 rear
View attachment 202737

A-3
GL500 airbox, airbox/carb boot, 2pcs GL500 separator chamber (also fits CX500E, CX650E)
GL500 driver footpegs
Generic highway pegs
GL1100 ('82) master cylinder
GL500 master cylinder
GL500 driveshaft
View attachment 202738

A-4
Assorted logos/emblems. Some still have the attachment pins, a couple of the big ones have holes for mounting screws (the others could be drilled)
View attachment 202739

A-5
GL500/650 coolant recovery tanks, various condition
GL500/650 air dams (may fit CX500 too)
GL500 rad grill
View attachment 202740

I would like the 500 Radiator grill. Do you have a PayPal account? How much for the grill and postage?

 

[OldGold]

I would like the 500 Radiator grill. Do you have a PayPal account? How much for the grill and postage?

Also, If you have a 650 tach I would be interested in that also.

 

[Sidecar Bob]

Bri-Guy: I have two left switch assemblies, (both missing the high/low switch knob). Send me a conversation (what used to be a PM) with your zip code and I'll reply with numbers.

OldGold: I had two GL500 tachs shich would have worked but they went before the second set of pics. The rad grill is still here. Send me a conversation (what used to be a PM) with your zip code and I'll reply with numbers.

Both: Have a good look through the pics and make sure there isn't something else you want too because it costs a lot less to mail a bigger box now than to mail a second box later.

 

[Sidecar Bob]

Fall sale:
I need to get the garage empty enough that we can start parking the car can park inside for the winter soon. I'd rather get rid of these parts than trip over them in the shop all winter so until the end of October the price will be $5 + actual postage for as much of it as you want.
And remember any & all of this stuff is free to anyone who comes to pick it up.

 

[Jennghigh]

By chance are the black lowers still available!! A-8

 

[Sidecar Bob]

Yes. $10 + actual cost of postage. Message me with your mailing address and I'll let you know how much that is.