Honda CX 500 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,282 Posts
It may be the O rings on the crossover tube that is leaking. Sometimes it is hard to tell when these leak as they quickly let gas flow down to the outside of the float bowl. Only solution is to remove the carbs, separate them and replace the O rings on the tube. I once thought it was possible to just separate them enough to get the tube out, but that didn't pan out.



TAS Supply has these O rings, I think about $5.00 for 2.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top