Honda CX 500 Forum banner
1 - 1 of 1 Posts

835 Posts
Anyone have a recomedation for rejuvenating the final drive boot and other flex coupling like the air intake tubes?

For the air intake tubes, there is a method of using bicycle innertubes - sort of forced over the rubber parts, then

trimmed to look good. If you use a good contact cement, and sort of 'roll' the tube onto it, it seals up pretty much 100%.

As for the drive boot, it's a tougher story. They do come up once in a while on Ebay, and are often in really good shape.

Keep your eyes open.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.