Honda CX 500 Forum banner
1 - 1 of 14 Posts

· Registered
2,176 Posts
A word of caution, the bolt goes all the way through the shift lever and through a notch

in the tranny shaft and the lever will not come off the shaft unless the bolt is completely removed.

You may need to slip the lever a notch or so on the splines, the lever may be contacting the motor

housing before the transmission is fully in gear. Just a thought but.... I know this from experience.
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.