Honda CX 500 Forum banner

different hose clamp question

1124 Views 6 Replies 3 Participants Last post by  LowLife1220
my question is, is there a specific type of hose clamp meant to hold the intake snorkle/ air pods to the lip of the carbs? i've been using standard hose clamps and they don't stay on like they are wider than the lip of what they are clamping to.
1 - 4 of 7 Posts
the lip of the carb is really stubby. i finished the intake i was telling you about stitch. i still can't find my camera to post pictures but when i do i'll post some pictures.
I have used zip ties but they are ghetto. maybe metal zip ties or cv ties.
I'm just going to use zip ties. the standard 3/8" clamp rolls over the lip and pops off everytime.
1 - 4 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.