Honda CX 500 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
505 Posts
I have a skinny arse so with my Euro seat,which I found a bit hard after a couple of hours riding,I made the following mod.-I removed the seat cover down one side and peeled it back to expose the foam-I sat on the bike and marked with a sharpie where my two bum bones touched the foam-I cut out the two holes in the foam where the marks were with a 50mm hole saw-I then glued in two 50mm diam pieces of soft foam into the holes and replaced the cover.The net result is that the seat still has great support outside of my bum bones,but nice and comfy inside.I find I can travel great distances in comfort now.
 
1 - 1 of 1 Posts
Top