Honda CX 500 Forum banner
1 - 2 of 2 Posts

·
Registered
1982 Honda CX500 custom
Joined
·
15 Posts
Discussion Starter · #1 · (Edited by Moderator)
Hello,
I inherited a CX500 project, but have hit a snag. I have an analog speedo and key ignition that need mounting.
The front end is off of a GXSR 2002 , I am thinking of building a bracket out of thick metal to mount everything on. But I am wondering of the easiest way/ cleanest way to do it.

Here is what I am working with.


Font Automotive design Toy Metal Drawing


Speedometer Odometer Gauge Vehicle Automotive lighting


Cylinder Auto part Engineering Transparency Composite material
 

·
Registered
Joined
·
57 Posts
Hello,
I inherited a CX500 project, but have hit a snag. I have an analog speedo and key ignition that need mounting.
The front end is off of a GXSR 2002 , I am thinking of building a bracket out of thick metal to mount everything on. But I am wondering of the easiest way/ cleanest way to do it.

Here is what I am working with.


View attachment 212998

View attachment 212997

View attachment 212996
I relocated my ignition key to right behind the right cylinder, I welded a bracket off the center engine mount. I can take a picture of of the bracket if you like, but my wiring is different because I am using an munit and I just got a random key. I don't need any of the other features that the stock key does.
Motor vehicle Automotive fuel system Automotive exterior Hood Gas
 
1 - 2 of 2 Posts
Top