Honda CX 500 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
220 Posts
Discussion Starter · #1 ·
Hi folks, I have Fuel System Light on after bike turns one. Computer reads 1 0 W, chart for trouble shooting



P2 Sensor Open Circuit Fail Safe Function

Shorted Signal Wire P2 is fixed at 760mmHG.

Faulty Waste Gate



Any of you experts care to decifer this for me please.



Riq
 

·
Registered
Joined
·
220 Posts
Discussion Starter · #2 ·
I have been doing some serious reading to solve the 1 0 W fault. It seems I will need to test the P2 sensor. Can I get directions as where to get the harness or building instructions. Also, I have noticed I have an exhauste leak where the mufler connects to the down pipe. Can thus cause sensor problems?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top