Honda CX 500 Forum banner

clear coat remover

1574 Views 5 Replies 6 Participants Last post by  ramprat06
Outside of a lot of elbow grease, is there a solvent that will easily take off the clear finish that is on the polished parts?
1 - 1 of 6 Posts
Get a spray can of Aircraft Paint Remover from your auto parts store and follow directions on the can. It contains methyl chloride which is what you need to cut thru the clear coat. Be careful with this stuff, it is known to cause warts on rocks.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.