Is it for a dual disc? If the distance apart is the same I don't see why they wouldn't work.
CB650 Fork Tubes on a CX500
I decided to take a risk and buy some used CB650 fork tubes and lowers. These are 35mm as are my 81' Custom fork tubes. The last used set I bought were beat up and the decent ones I found were always about $75 to $125.
The lowers or sliders are different but all I wanted were the tubes.
I'll report back on how they worked out.
The lowers or sliders are different but all I wanted were the tubes.
I'll report back on how they worked out.
1 - 3 of 13 Posts
There use to be one. This is what I took from it.
https://sites.google.com/site/cx500gl500/parts-interchange
I think there's another too from the Davis site.
https://sites.google.com/site/cx500gl500/parts-interchange
I think there's another too from the Davis site.
Lets see if this doesn't look horrible.
http://ftso.net/cx-gl/drop.io_stuff/cx_-_gl_500_-_650_parts_interchangeability.pdf
Ok it looked horrible so maybe the link works.
http://ftso.net/cx-gl/drop.io_stuff/cx_-_gl_500_-_650_parts_interchangeability.pdf
Ok it looked horrible so maybe the link works.
1 - 3 of 13 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda CX 500 Forum
A forum community dedicated to Honda CX 500 motorcycle owners and enthusiasts. Come join the discussion about modifications, parts, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Top Contributors this Month
View All
Sidecar Bob
213 Replies
Randall-in-Mpls
170 Replies
CXPHREAK
101 Replies
Recommended Communities
