The first thing I would check is the float levels. Probably give the carbs a good cleaningHowzit guys.
I am new at this, so this might be a newby question.
I have a '81 cx. It runs beautifully, but my right bank is running quite rich.
I don't know anyting about setting these carbs. Can someone point me in the right direction please?
My left back burns sweetly. Just my right bank is burning very black.
and see what that does for it. There is a book available through this forum that will help
you do the carbs. Take the carbs apart and clean every orifice you can find, set the float
levels and start with the idle adjust needles out about 2 and 1/2 turns. Make sure the jets
are in the correct locations. You will get many responses and lots of help from forum members.