You don't have to use a CNC it was just an exemple for the template of your plate and where to fix it ;-)
You can buy a metal plate at your local hardware store cut and drill 3 holes paient it and the job is done for maximum 20E ;-)
CXPHREAK: sad enough I dont have a vice But all the other things I do have... I have to get a vice and I need to make myself a nice garage Just bought a old house from 1928... So there is a lot of renovating... But the garage must be moved up on the list
CX500, 1981, Denmark
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.