Honda CX 500 Forum banner

bike misses when rolling on throttle

971 Views 4 Replies 3 Participants Last post by  Dash
Hey guys, Ok, I fixed the leaking carb. It was a cracked overflow tube. I've got it so it will start and idle well, but when I head down the road it starts missing as I roll on the throttle. I have been through the carbs several times n search of another problem so I know they are clean. Float height is good. I am not sucking air around the intake boots. The CV slides move smoothly in the bore. I have new gas. Any ideas on what I may look at next? Thanks guys. Zeph
1 - 1 of 5 Posts
Plugs, plug resistors, coils etc - if you're pretty sure the fuel part of the equation is correct go to ingition next.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.