Honda CX 500 Forum banner
1 - 5 of 5 Posts

·
Super Moderator
Joined
·
15,416 Posts
Discussion Starter · #1 ·
This weekend I was doing a stator and headgasket change up at David Wieners and for a while I have heard about this bigger Wiener tool and it works.



Honda introduced this tool for adjusting the tappets on our bikes and it costs around $20. Similar to this one that costs the same price.







Then there's my tool that must cost maybe 50 cents a tool.







And then there's the bigger Wiener Tool ™ `

The tool must be about 15 inches long and it seems way to long to do the job but the trick is in the handle. It makes slight adjustments and holding it really easy. So there's my endorsement for the bigger Wiener Tool.



Beware it will make your current tool look small.







I'm glad to have one in my box. May not be suitable to so to large groups in public but in the privacy of your own garage it works great.
 

·
Registered
Joined
·
3,530 Posts
I know there's a good joke in here somewhere about a big tool compensating for a Wiener deficit...but I won't go there.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top