Honda CX 500 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,195 Posts
I've had this after a bike has been left and the Floats and Float needle valves needed cleaning as they have become coated with fuel Patina and or Alloy corrosion in and around the float needle valve hole.



Best take the carbs off and give them a bit of a clean and check the Floats and FNVs,



http://globalcxglvtwins.hostingdelivered.com/viewtopic.php?f=19&t=110


Tim,



I have a new set of needle valves & float bowl gaskets, if you need them they are yours.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top