Honda CX 500 Forum banner
1 - 1 of 16 Posts

· Registered
8,355 Posts
Yes.There are 3 on the bikes.One at the front covering the end of the crank shaft(Used for setting TDC for doing the tappets/cam-chain)

One on the top right hand side rear of the engine and the Filler cap on the Rear shaft drive box.

If you cannot get one from a Honda/Bike dealer they are also used on Honda-engined boats,

But they are supposed to have an O-ring with them for sealing.
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.