Honda CX 500 Forum banner
swingarm
1-5 of 5 Results
  1. CX Customization and Mods Forum
    Internet said 150 tire fits in the swing arm without any mods. Got a Cognito Moto rear hub conversion, laced it up to 17" x 4.25" rim and got 150/60/17 tire. It turns out, in my situation, its just short by about 2mm on the side of the final drive. Plenty of room on the other side, about an...
  2. CX500 & CX650 Turbo Forum
    Hello, I'm new to this bike, but was wondering if the 500T and 650T aluminum swing arm weldments are the same part? There are some different pieces between the 500 and 650 parts fiche online, but it looks like the main weldment might be the same. I'm trying to put an aluminum swing arm on my...
  3. CX Customization and Mods Forum
    Hi All I am doing a CX650E project and have been looking at removing the prolink system all together and modifying the swing arm to accept a new monoshock. A local guy I spoke to told me he has done a couple of these for some customers but no real feedback on how well it has worked. Removing...
  4. Technical Help Forum
    Evening all, So just got my 500 frame back, looped, new seat loads of parts painted which means...... Time to reasemble .... But I'm wisely replacing the bearings first of course... just for the record this my first project. Anyway, Iv got my Haynes manual and understand how to remove the...
  5. Selling and Buying Forum
    If someone has a non-title or wrecked frame and will cut to small pieces off it, let me know. I need the two side pieces where swing arm bolts to. Project in the works.
1-5 of 5 Results
Top