Honda CX 500 Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-4 of 4 Results
  1. Technical Help Forum
    Some backstory: Picked up a Gl500/cx500 (Can anyone tell me which?) for $80 bucks, it was missing the left side cylinder head and looks like it was sitting outside for a while. The ring of rust was so bad I couldn't get it to turn over manually, so I cleaned up the rust as best I could with some...
  2. Technical Help Forum
    Hello, I have been searching the threads and can not find one that mentioned the MC piston size for the aforementioned bike. The bike is a dual disc four total piston set up. Any help or (links to a MC) would be appreciated. Thanks Kris K
  3. Technical Help Forum
    Hey Everyone - can you make some suggestions on front brake calipers that bolt onto my 1980 cx500 custom? Was hoping there may be something new out there I could buy that does not require mods.... Any suggestions?? If not, what should I buy to replace mine? I think the previous owner used...
  4. Technical Help Forum
    My crankshaft has some score marks underneath the left piston bearing. This is what caused the motor to seize on the previous owner. I was able to score some fairly new piston rod bearings off eBay, so my question is, If I rebore the crank to take off the tiny bit of scoring, will I need...
1-4 of 4 Results