Honda CX 500 Forum banner
loss of power

Discussions Showcase Albums Media Media Comments Tags

1-2 of 2 Results
  1. Technical Help Forum
    Installed an ignitech DCCDIP2 ignition on my '79 cx500 to overpass the bad coil in the stator. After I've installed it, the bike will run and shift into gear, but has no power at all to actually get the bike moving. Checked all the wiring and it seems good/right. Feels exactly like gears 2-5 did...
  2. Technical Help Forum
    I have a problem with my 82 GL500 which just started all of sudden today. So the bike starts fine and idles as normal, but when I get to 4th gear and around 4k to 5k rpm the power just falls off. If I drop down to 3rd gear or lower and open the throttle, there is no loss of power as rpm...
1-2 of 2 Results
Top