Honda CX 500 Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-2 of 2 Results
  1. Technical Help Forum
    Good afternoon everyone, I replaced my fork seals two weeks ago with the 4 into 1 brand seals. Those seals were insanely tight going on. They leaked out after 2 days. Replaced the seals last week with K&S seals from a local shop. I put superglue in the pits. The pits aren’t that big. They still...
  2. Technical Help Forum
    My bike is an 82 CX500 Custom with air assist forks. I installed a new fork seal to replace one that was leaking. Everything looked fine on the slider and tube. I used a PVC pipe fitting and a section of pipe to install the new seal. It seemed like it took a lot of force to get the seal all the...
1-2 of 2 Results
Top