Honda CX 500 Forum banner

flywheel

  1. Technical Help Forum
    My flywheel is pretty dirty (rusted). I'd love to be able to blast it clean, but since it's magnetic, my aluminum oxide will stick to it, and soda won't really do anything to rust. Do you all have a suggestion as to how to get it all purdy again?
  2. CX500 & CX650 Turbo Forum
    Hey everyone, Here in Minnesota, we have snowmobiles that need clutch work from time to time. On many, the cluch is mounted on a tapered shaft. There is a method of removal called the water method that I am wondering if it would work on the turbo flywheel? For a snowmobile clutch...
  3. Technical Help Forum
    So I bought a 1980 CX500C a couple months ago that was completely in pieces. The stator Source Coil Low Speed tested outside of range and the three yellow wires all had continuity to Ground. So I bit the bullet and bought a G8 stator from Custom Rewind and an Ignitech from Cobram's most recent...
  4. Technical Help Forum
    Hey folks, I am currently finishing up my first triple bypass on my 82 custom and all seems to be going well. I had a slight problem with the cam sprocket mount shifting while removing the sprocket, but managed to fix it thanks to the valuable info on this site. I am about to put the rear cover...
Top