Honda CX 500 Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-3 of 3 Results
  1. Technical Help Forum
    For some reason, after I get my 1982 CX500 up to 50-60mph for a decent amount of time (5 minutes), when I slow down my clutch is very tight and difficult to pull in. I just had to pull off the side of the road, where I stalled. When the bike was off, the clutch was still sticking an very hard...
  2. Technical Help Forum
    GL650 Clutch basket issue - assistance needed I am working on a 1983 GL-650. I pulled the clutch pack out. As I am reinstalling the clutch outer housing, I can not get it to seat into the engine thoroughly. I think it is because of the two gears on the outside of the housing are offset. It...
  3. Technical Help Forum
    Ok so 1980 CX500 Deluxe, Went from standard bars to Norman Hyde M bars, ran great before swap, Engine still runs fine but clutch is kinda grabby, What would be the best fix for this, shortening the cable, or re-routing the cable? I don't want to cut and hack if this isn't needed.
1-3 of 3 Results