Honda CX 500 Forum banner

cam

  1. Technical Help Forum
    Hi there, New cx owner here and I am working on rebuilding my engine. As some background, I have gotten at least 300 miles on the bike with no issues, I am now in the middle of an engine rebuild. Opened up the engine to take a look and learn a bit about the bike, replace some gaskets, and...
  2. Technical Help Forum
    I just bought my first Honda CX500c a couple weeks ago. It has about 32,000 miles but in great condition. The previous owner told me I would need to check the valve tappet clearance soon. So when I finished adjusting the valve clearance, I decided to adjust the cam chain. The original owners...
  3. Technical Help Forum
    Okay so I am building my first bike up from a completely torn apart engine. I have the bike together and it ran yesterday at full throttle for a few minutes. Then after a little bit I started getting coughing and back firing out of the carbs. I pulled the carbs off to do a rebuild on them...
  4. Technical Help Forum
    Another rookie mistake, I still had my tork wrench set for an M8 and snaped of the M6 that goes in the marked hole above. Its in there good and didnt snap off cleanly, do you guys think its a big problem if i leave that bolt out??
Top